Steel bollards and impact protection, made in Doncaster
Root-set, bolt-down, removable and telescopic bollards in 76mm, 90mm and 114mm CHS, plus heavy 168mm sections for vehicle-impact locations. Galvanised or powder coated in-house to any RAL.
8 products
Bollards & Impact Protection
Fixed Flat Top Bollard
Fabricated in our Doncaster workshop from CHS with a fully welded flat cap plate and a sealed root section for direct concrete setting. Cut, welded and finished in-house. 168mm CHS, 5mm wall Fully welded flat cap plate Root-set, 500mm below ground Hot dip galvanised to BS EN ISO 1461 as standard Powder coat to any RAL on request Made to order — dispatched in 3–4 working days. Galvanised finishes 7–10 working days.
£56.50 ex VAT
Bollards & Impact Protection
Fixed Mitre Top Bollard
Angled mitre-cut head with a welded closing plate — sheds water and reads as a more considered detail on public realm schemes. Fabricated start to finish on Bentley Road. 168mm CHS, 5mm wall 45° mitre head, fully welded and dressed Root-set, 500mm below ground Galvanised to BS EN ISO 1461, powder coat optional Made to order — dispatched in 3–4 working days.
£58.50 ex VAT
Bollards & Impact Protection
Base Plated Bollard
Surface-fixed bollard on a welded and drilled base plate — no excavation, bolts straight to a slab or existing hardstanding. Ideal for retrofit protection in car parks and yards. 168mm CHS on 250 x 250 x 10mm plate Four 18mm fixing holes, gussets welded to the shaft Supplied with resin anchor set Galvanised or RAL powder coat Made to order — dispatched in 3–4 working days.
£59.50 ex VAT
Bollards & Impact Protection
Single Waisted Bollard
Traditional waisted profile with a domed head, fabricated from tube and plate rather than cast — lighter, cheaper to freight and easier to replace after impact. Waisted collar detail, welded and dressed smooth Semi-dome head plate Root-set or base plated on request Galvanised or RAL powder coat Made to order — dispatched in 3–4 working days.
£78.50 ex VAT
Bollards & Impact Protection
Removable Lock-Down Bollard
Lifts out of a flush ground socket and locks down with an integral padlock housing. Fabricated with a machined spigot so it drops in cleanly rather than fighting the socket. 114mm or 168mm CHS shaft Flush galvanised ground socket with drainage and lid Integral padlock shroud, padlock not supplied Lifting handle welded to the head Made to order — dispatched in 3–4 working days.
£124.50 ex VAT
Bollards & Impact Protection
Fold Down Bollard
Hinged at the base so it drops flat to the ground and locks upright — the right answer where a removable bollard would get lost. Hinge pin and lock housing fabricated and fitted in-house. Heavy hinge block welded to a bolt-down base Locks in the upright position, padlock shroud included Rubber buffer on the fold-down face Galvanised, powder coat optional Made to order — dispatched in 3–4 working days.
£136.50 ex VAT
Bollards & Impact Protection
Telescopic Bollard
Retracts into its own below-ground sleeve and locks at full height or flush. Sleeve, shaft and lock plate all fabricated here so tolerances are ours to control. Telescoping shaft in a sealed ground sleeve Locks up and locks down Drainage port in the sleeve base Galvanised throughout Made to order — dispatched in 7–10 working days (galvanising turnaround).
£268.00 ex VAT
Bollards & Impact Protection
Anti-Ram Security Bollard
Heavy-wall section on a deep root with a reinforced base cage, specified where the bollard has a real job to do rather than a visual one. Foundation detail supplied with the order. 168mm or 219mm CHS, 8mm wall Reinforcing bar cage welded to the root 1000mm foundation depth recommended Galvanised, RAL powder coat optional Made to order — dispatched in 7–10 working days.
£142.50 ex VAT
Need bollards & impact protection to your own sizes?
Send a drawing or a schedule and we'll price it against your spec — budget costs back within 48 hours.