CCTV poles, hinged columns and camera mounting steel
Tubular and square CCTV poles from 3m to 8m with internal cable routes, gland plates and cabinet mounts. Hinged columns let a camera be serviced at ground level without a platform.
5 products
CCTV Poles & Columns
Tubular CCTV Pole
Fabricated CCTV column with a welded cap plate, internal cable route and a lockable access door at low level. Cut, welded, blasted and coated in our Doncaster workshop — nothing subcontracted. 114mm to 168mm CHS depending on height Lockable cable access door with a welded reinforcing frame Internal earth stud and cable cleat Root-mounted or flange-mounted on a drilled base plate Galvanised to BS EN ISO 1461, RAL powder coat optional Made to order — dispatched in 7–10 working days. Drilled to your camera bracket pattern at no extra cost.
£285.00 ex VAT
CCTV Poles & Columns
Square Section CCTV Pole
Square hollow section column — flat faces make bracket and enclosure mounting far easier than a round pole, and it reads cleaner on modern buildings. 100mm to 150mm SHS depending on height Lockable cable access door, welded reinforcing frame Welded cap plate and internal earth stud Drilled to your bracket pattern on request Galvanised, RAL powder coat optional Made to order — dispatched in 7–10 working days.
£295.00 ex VAT
CCTV Poles & Columns
Hinged Raise & Lower CCTV Column
Hinged at the base so the head comes down to working height for camera service — no MEWP hire every time a lens needs cleaning. Hinge block, pivot pin and locking collar all fabricated here. Machined hinge block on a bolt-down base flange Locking collar and safety pin at the upright position Winch point welded to the shaft Galvanised throughout Made to order — dispatched in 7–10 working days.
£985.00 ex VAT
CCTV Poles & Columns
Camera Mounting Bracket
Fabricated mounting brackets for pole, wall and corner installations, drilled to the fixing centres of your camera or enclosure rather than a generic pattern. 6mm plate, fully welded gussets Cable pass-through with a grommet Drilled to your template — send the datasheet Galvanised or RAL powder coat Made to order — dispatched in 3–4 working days.
£68.00 ex VAT
CCTV Poles & Columns
Column Base Plate & Foundation Cage
Holding-down bolt cage and template for flange-mounted columns, made to your bolt centres so the column lands square first time. M16 or M20 holding-down bolts with plate washers Welded cage with a setting-out template Galvanised throughout Made to order — dispatched in 3–4 working days.
£96.00 ex VAT
Need cctv poles & columns to your own sizes?
Send a drawing or a schedule and we'll price it against your spec — budget costs back within 48 hours.