Yard, dock and racking protection for logistics sites
Armco and crash rail runs set out to your yard layout, dock and rack-leg protection, wheel stops, hoop barriers and trolley bays. Heavy gauge and galvanised, delivered ready to bolt down, with out-of-hours installation to avoid shutting an operation down.
11 products
Car Park & Warehouse Protection
Column & Corner Protector
Wrap-around steel guard for warehouse racking legs, portal frame columns and building corners. Rolled, welded and coated in-house in high-visibility yellow or any RAL. 6mm plate, radiused corners Bolt-down feet, resin anchors supplied Yellow RAL 1023 as standard Made to order — dispatched in 3–4 working days.
£96.00 ex VAT
Car Park & Warehouse Protection
Hoop Barrier
Simple bent-tube hoop for protecting doorways, dock edges and pedestrian routes. Bent and welded from one length so there is no joint at the crown. 60mm or 76mm CHS Root-set or bolt-down feet Yellow RAL 1023 or galvanised Made to order — dispatched in 3–4 working days.
£84.00 ex VAT
Car Park & Warehouse Protection
Armco-Style Post & Rail Bay
Fabricated posts, cleats and end terminals for crash rail runs in yards and warehouses. We make the posts and fixings; the rail section itself is bought in as a material. Fabricated SHS posts with welded rail cleats Single or double rail height End terminal wraps included Galvanised finish Made to order — dispatched in 3–4 working days.
£156.00 ex VAT
Car Park & Warehouse Protection
Bump Rail & Wall Protection
Wall-mounted impact rail on fabricated stand-off brackets, keeping forklifts and pallet trucks off blockwork and cladding rails. Rail on welded stand-off brackets Supplied in 2.0m or 3.0m lengths Yellow RAL 1023 or galvanised Made to order — dispatched in 3–4 working days.
£118.00 ex VAT
CCTV Poles & Columns
Hinged Raise & Lower CCTV Column
Hinged at the base so the head comes down to working height for camera service — no MEWP hire every time a lens needs cleaning. Hinge block, pivot pin and locking collar all fabricated here. Machined hinge block on a bolt-down base flange Locking collar and safety pin at the upright position Winch point welded to the shaft Galvanised throughout Made to order — dispatched in 7–10 working days.
£985.00 ex VAT
Intercom & Reader Posts
Twin Height Intercom Post
Two apertures at car and HGV driver height on one post, so a single pedestal serves both. Apertures cut to your device footprints before coating. 150 x 150mm SHS Two device apertures, heights to your spec Full-height rear access panel Galvanised or RAL powder coat Made to order — dispatched in 3–4 working days.
£298.00 ex VAT
Commercial Gates
Cantilever Sliding Gate
Cantilever gate on a fabricated track beam — no ground track across the opening, so it works on sites that get mud, ice and heavy plant. Frame, beam, roller carriages and posts all made here. Cantilever beam sized to the clear opening Roller carriage posts with adjustable bearings Infill: vertical bar, welded mesh, palisade or sheet Prepped for automation on request Galvanised and powder coated to any RAL Prices shown are from-prices for standard clear openings. Anything non-standard, raked or automated is priced from your drawing — use the bespoke route and we will come back within 48 hours.
£3,450.00 ex VAT
Commercial Gates
Bi-Fold Speed Gate Frame
Folding leaf sets for openings that need a fast cycle in a short run-back. Frames, pivot posts and folding hardware fabricated here; automation supplied and commissioned as a service. Two-leaf folding sets per side Heavy pivot posts with greased bearings Prepped for automation as standard Galvanised and powder coated From-price for the listed clear opening. Automation quoted separately.
£4,285.00 ex VAT
Access & Safety Metalwork
Mezzanine Edge Protection
Bolt-down edge protection for mezzanines and loading edges, with a knee rail and toe board as standard. Posts, top rail, knee rail and toe board Bolt-down base plates Supplied in 1.5m or 2.0m bays Galvanised or RAL powder coat Made to order — dispatched in 3–4 working days.
£148.00 ex VAT
Access & Safety Metalwork
Vertical Ladder & Safety Cage
Fixed vertical access ladder with a hooped safety cage and welded wall stand-offs, made to the climb height you give us. Welded stringers and round rungs Hooped safety cage above 2.5m Wall stand-off brackets included Galvanised finish Made to order — dispatched in 7–10 working days.
£685.00 ex VAT
Access & Safety Metalwork
Machine & Plant Guarding
Bolt-together mesh guarding panels and posts for machinery and robot cells, with hinged or sliding access doors and interlock mounting plates. Welded frames with mesh infill Hinged or sliding access door option Interlock switch mounting plates Powder coated to any RAL Made to order — dispatched in 3–4 working days.
£168.00 ex VAT
Need for logistics & warehousing to your own sizes?
Send a drawing or a schedule and we'll price it against your spec — budget costs back within 48 hours.