Steelwork for main contractors
Hoarding frames, site gates, edge protection, access steel and permanent metalwork made to your drawings and delivered against your programme dates, in phases if the site needs them. RAMS and delivery notes are issued before every drop, and non-standard sizes carry no lead time penalty.
19 products
Bollards & Impact Protection
Fixed Flat Top Bollard
Fabricated in our Doncaster workshop from CHS with a fully welded flat cap plate and a sealed root section for direct concrete setting. Cut, welded and finished in-house. 168mm CHS, 5mm wall Fully welded flat cap plate Root-set, 500mm below ground Hot dip galvanised to BS EN ISO 1461 as standard Powder coat to any RAL on request Made to order — dispatched in 3–4 working days. Galvanised finishes 7–10 working days.
£56.50 ex VAT
Bollards & Impact Protection
Base Plated Bollard
Surface-fixed bollard on a welded and drilled base plate — no excavation, bolts straight to a slab or existing hardstanding. Ideal for retrofit protection in car parks and yards. 168mm CHS on 250 x 250 x 10mm plate Four 18mm fixing holes, gussets welded to the shaft Supplied with resin anchor set Galvanised or RAL powder coat Made to order — dispatched in 3–4 working days.
£59.50 ex VAT
Height Restriction Barriers
Fixed Goalpost Height Restriction Barrier
Welded goalpost frame with a signage plate mount on the crossbeam, set into concrete uprights. Clear height is fixed at fabrication so there is nothing to adjust or vandalise. SHS uprights with welded base cleats or root fixing Crossbeam with pre-drilled signage plate mount Clear height 2.1m standard, others on request Galvanised, RAL powder coat optional Made to order — dispatched in 7–10 working days.
£695.00 ex VAT
Height Restriction Barriers
Removable Height Restriction Barrier
Crossbeam and uprights lift out of flush ground sockets for occasional plant or delivery access, then drop straight back in. Sockets supplied with the barrier. Lift-out uprights in galvanised ground sockets Bolted crossbeam, two-person lift Socket lids included Galvanised finish Made to order — dispatched in 7–10 working days.
£895.00 ex VAT
Car Park & Warehouse Protection
Pedestrian Guardrail Panel
Welded infill guardrail for footways, school gates and car park edges. Panels and posts are made here, so non-standard bay widths and raking runs cost no more than the catalogue sizes. 1000mm high above ground Vertical infill at 100mm centres Root-set or base-plated posts Galvanised or RAL powder coat Made to order — dispatched in 3–4 working days.
£118.00 ex VAT
Commercial Gates
Cantilever Sliding Gate
Cantilever gate on a fabricated track beam — no ground track across the opening, so it works on sites that get mud, ice and heavy plant. Frame, beam, roller carriages and posts all made here. Cantilever beam sized to the clear opening Roller carriage posts with adjustable bearings Infill: vertical bar, welded mesh, palisade or sheet Prepped for automation on request Galvanised and powder coated to any RAL Prices shown are from-prices for standard clear openings. Anything non-standard, raked or automated is priced from your drawing — use the bespoke route and we will come back within 48 hours.
£3,450.00 ex VAT
Commercial Gates
Tracked Sliding Gate
Ground-tracked sliding gate for level, well-drained openings — lighter and cheaper than a cantilever where the ground conditions allow it. Welded frame on bogie wheels Track, guide posts and end stop included Infill to your specification Galvanised and powder coated From-price for the listed clear opening. Bespoke sizes priced from drawing within 48 hours.
£2,685.00 ex VAT
Commercial Gates
Double Leaf Swing Gate
Pair of braced swing leaves with heavy hinge posts and a centre drop bolt. The most cost-effective commercial gate where there is room to swing. Welded box frame, braced diagonals Adjustable hinges, centre drop bolt and ground receiver Infill: vertical bar, mesh, palisade or sheet Galvanised and powder coated From-price for the listed clear opening.
£1,285.00 ex VAT
Commercial Gates
Single Leaf Swing Gate
Single braced leaf for personnel and narrow vehicle openings, hung on a fabricated post with adjustable hinges. Welded frame with braced diagonal Adjustable hinges and slam latch Infill to your specification Galvanised and powder coated Made to order — dispatched in 7–10 working days.
£425.00 ex VAT
Commercial Gates
Gate Posts & Drop Bolt Set
Fabricated hanging and closing posts with welded hinge lugs, plus a drop bolt and ground receiver. Sized to the leaf weight rather than a catalogue default. Heavy SHS posts, welded hinge lugs Drop bolt with a galvanised ground receiver Root-set or base-plated Galvanised finish Made to order — dispatched in 3–4 working days.
£385.00 ex VAT
Mesh Gates
Mesh Infill Gate — Single Leaf
Single leaf gate with a welded steel frame and mesh infill to match an existing fence line. We fabricate the frame, posts and hardware; the mesh panel is bought in as a material. Welded box frame, mesh clamped and bolted Twin-wire or 358 high-security infill Adjustable hinges and lock box Galvanised and powder coated Made to order — dispatched in 7–10 working days.
£385.00 ex VAT
Mesh Gates
Mesh Infill Gate — Double Leaf
Double leaf vehicle gate with mesh infill, braced frames and a centre drop bolt, matched to twin-wire or 358 fence lines. Braced welded frames, bolted mesh infill Centre drop bolt and ground receiver Heavy hinge posts included Galvanised and powder coated Made to order — dispatched in 7–10 working days.
£1,485.00 ex VAT
Railings & Balustrade
Vertical Bar Railing Panel
Welded vertical bar railing for boundaries and plant enclosures, made in bay widths to suit the run rather than forcing standard modules onto site. Vertical bars through horizontal rails Standard heights 1200mm and 1800mm Root-set or base-plated posts Galvanised and powder coated Made to order — dispatched in 3–4 working days.
£158.00 ex VAT
Railings & Balustrade
Stair & Landing Balustrade
Balustrade to the rake of your stair, fabricated from a site survey so the panels land on the string without packing or bodging. Raked panels fabricated to survey Vertical bar or perforated sheet infill Fixed to string or landing edge Galvanised and powder coated Made to order — dispatched in 7–10 working days from approved survey.
£225.00 ex VAT
Site & Street Metalwork
Louvred Plant Screen
Louvred screening for condensers, generators and roof plant — fabricated frames with fixed blade louvres set to the free area the M&E spec calls for. Welded frame with fixed blade louvres Free area to your specification Access door option Galvanised and powder coated to any RAL Made to order — dispatched in 7–10 working days.
£685.00 ex VAT
Covers & Frames
Recessed Access Cover & Frame
Recessed tray cover that takes the surrounding paving or screed finish, so the cover disappears into the floor. Fabricated to the opening on your drawing. Recessed tray with drainage channel Welded frame with anchor lugs Lifting keys supplied Galvanised finish Made to order — dispatched in 7–10 working days.
£285.00 ex VAT
Access & Safety Metalwork
Straight Flight Steel Staircase
Steel stair with welded stringers, treads and a landing, fabricated to the rise and going measured on site. Handrail and balustrade supplied to match. Welded stringers, chequer plate or open grating treads Landing frame included Fabricated from site survey Galvanised and powder coated From-price for the listed rise. Priced properly from your survey within 48 hours.
£1,685.00 ex VAT
Structural Fabrication
Fabricated Frames, Brackets & Support Steelwork
One-off frames, brackets, base plates, cleats and support steelwork made from your drawing or a sketch. This is the everyday work of the shop. Cut, drilled and welded to your drawing Section, plate and tube in stock or ordered to spec Blasted and coated in-house Supply only or supply and install Priced from your drawing. The listed price is a nominal booking value — send drawings through the bespoke route for a real figure within 48 hours.
£125.00 ex VAT
Finishing Services
Trade Shot Blasting & Powder Coating
Blast and coat for other fabricators, engineers and installers. Bring us your steel and it comes back blasted, primed if required and coated to any RAL. Shot blasting to SA2.5 Solvent-free powder coating, full RAL range Texture, hammer and metallic finishes Zinc-rich primer for exterior corrosion resistance Typical coating turnaround seven days Priced by area and component size. The listed price is a nominal booking value — send a component list for a proper quote.
£95.00 ex VAT
Need for main contractors to your own sizes?
Send a drawing or a schedule and we'll price it against your spec — budget costs back within 48 hours.