Intercom pedestals and reader posts cut to your device
Single-device, reader, combination and twin-height posts with apertures machined to the exact footprint of the hardware you are fitting, plus internal cable routes and gland plates.
4 products
Intercom & Reader Posts
Single Intercom Post
Steel intercom pedestal with a rear access panel and a clean cable route from the root to the device aperture. We supply the post — the electronics come from your own supplier. 150 x 150mm SHS, welded cap Lockable rear access panel Cable entry at the root, sealed grommet Supplied undrilled, or cut to your unit's template Galvanised or RAL powder coat Made to order — dispatched in 3–4 working days.
£195.00 ex VAT
Intercom & Reader Posts
Twin Height Intercom Post
Two apertures at car and HGV driver height on one post, so a single pedestal serves both. Apertures cut to your device footprints before coating. 150 x 150mm SHS Two device apertures, heights to your spec Full-height rear access panel Galvanised or RAL powder coat Made to order — dispatched in 3–4 working days.
£298.00 ex VAT
Intercom & Reader Posts
Card Reader Post
Slim pedestal for proximity and keypad readers, with an angled head face so the reader sits square to the driver's window. 100 x 100mm SHS Angled head plate, aperture to your reader Rear access panel and cable grommet Galvanised or RAL powder coat Made to order — dispatched in 3–4 working days.
£168.00 ex VAT
Intercom & Reader Posts
Combination Intercom & Reader Post
One post carrying an intercom, a reader and, where needed, a keypad — apertures set out on a drawing you approve before we cut. 150 x 150mm SHS Up to three device apertures Full-height rear access panel Galvanised or RAL powder coat Made to order — dispatched in 3–4 working days.
£312.00 ex VAT
Need intercom & reader posts to your own sizes?
Send a drawing or a schedule and we'll price it against your spec — budget costs back within 48 hours.